Wondering how to use Anemometer in a sentence? Below are 10+ example sentences from authentic English texts. Including the meaning and synonyms such as gauge or gage.
Anemometer meaning
An instrument for measuring and recording the speed of the wind, a windmeter.
Using Anemometer
- The main meaning on this page is: An instrument for measuring and recording the speed of the wind, a windmeter.
- Useful related words include: wind gauge, wind gage, gauge, gage.
- In the example corpus, anemometer often appears in combinations such as: anemometer is, an anemometer, the anemometer.
Context around Anemometer
- Average sentence length in these examples: 22.3 words
- Position in the sentence: 6 start, 9 middle, 3 end
- Sentence types: 18 statements, 0 questions, 0 exclamations
Corpus analysis for Anemometer
- In this selection, "anemometer" usually appears in the middle of the sentence. The average example has 22.3 words, and this corpus slice is mostly made up of statements.
- Around the word, cup, wire, static, sits and factor stand out and add context to how "anemometer" is used.
- Recognizable usage signals include tube static anemometer is on and a common anemometer for basic. That gives this page its own corpus information beyond isolated example sentences.
- By corpus frequency, "anemometer" sits close to words such as abad, abolishment and abr, which helps place it inside the broader word index.
Example types with anemometer
The same corpus examples are grouped by length and sentence type, making it easier to see the contexts in which the word appears:
Pitot tube static anemometer is on the right. (8 words)
The pitot tube static anemometer is on the right. (9 words)
It may be described as a windmill or a propeller anemometer. (11 words)
The successful metal pressure tube anemometer of William Henry Dines in 1892 utilized the same pressure difference between the open mouth of a straight tube facing the wind and a ring of small holes in a vertical tube which is closed at the upper end. (45 words)
While the Dines anemometer had an error of only 1% at convert it did not respond very well to low winds due to the poor response of the flat plate vane required to turn the head into the wind. (39 words)
Instead, the ratio of the speed of the wind and that of the cups, the anemometer factor, depends on the dimensions of the cups and arms, and may have a value between two and a little over three. (38 words)
Example sentences (18)
An anemometer is installed on the tip of the building's mast; the anemometer sits at convert above sea level.
In 1450, the Italian art architect Leon Battista Alberti invented the first mechanical anemometer; in 1664 it was re-invented by Robert Hooke (who is often mistakenly considered the inventor of the first anemometer).
The three-cup anemometer also had a more constant torque and responded more quickly to gusts than the four-cup anemometer.
Vane anemometers One of the other forms of mechanical velocity anemometer is the vane anemometer.
An industrial version of the fine-wire anemometer is the thermal flow meter, which follows the same concept but uses two pins or stings to monitor the variation in temperature.
Icing alters the aerodynamics of an anemometer and may entirely block it from operating.
Industrial applications often contain dirt that will damage the classic hot-wire anemometer.
Instead, the ratio of the speed of the wind and that of the cups, the anemometer factor, depends on the dimensions of the cups and arms, and may have a value between two and a little over three.
It may be described as a windmill or a propeller anemometer.
Ping-pong ball anemometers A common anemometer for basic use is constructed from a ping-pong ball attached to a string.
Pitot tube static anemometer is on the right.
The first known description of an anemometer was given by Leon Battista Alberti in 1450.
The laser light is emitted (1) through the front lens (6) of the anemometer and is backscattered off the air molecules (7).
The pitot tube static anemometer is on the right.
The successful metal pressure tube anemometer of William Henry Dines in 1892 utilized the same pressure difference between the open mouth of a straight tube facing the wind and a ring of small holes in a vertical tube which is closed at the upper end.
Though the Lind was not the first it was the most practical and best known anemometer of this type.
When Robinson first designed his anemometer, he asserted that the cups moved one-third of the speed of the wind, unaffected by the cup size or arm length.
While the Dines anemometer had an error of only 1% at convert it did not respond very well to low winds due to the poor response of the flat plate vane required to turn the head into the wind.
Common combinations with anemometer
These word pairs occur most frequently in English texts:
- anemometer is 5×
- an anemometer 3×
- the anemometer 3×
- anemometer and 2×
- static anemometer 2×
- anemometer of 2×