Device in a sentence

Cable select is controlled by pin 28. The host adapter grounds this pin; if a device sees that the pin is grounded, it becomes the master device; if it sees that pin 28 is open, the device becomes the slave device.

Only one device on a cable can perform a read or write operation at one time, therefore, a fast device on the same cable as a slow device under heavy use will find it has to wait for the slow device to complete its task first.

Once your service is activated, you will be able to connect your device to your hotspot by selecting the hotspot in your device's Wi-Fi settings and entering the password provided to your device.

Only device manufacturers, device importers, and hospitals are to report device-related injuries, deaths, and significant malfunctions to the FDA.

Once your external device is physically connected to your Apple device, you can use the native Files app to access the external device.

Of course this doesn’t mean that the iPhone is a bad device to watch YouTube on, it just makes for better marketing to be able to call your device a “YouTube Signature Device”.

A balancing network can also be a device used between a balanced device or line and an unbalanced device or line for the purpose of transforming from balanced to unbalanced or from unbalanced to balanced.

A composite device only has a single device address because the host only assigns a device address to a function.

A domain controller is contacted when a user logs into a device, accesses another device across the network, or runs a line-of-business Metro-style app sideloaded into a device.

As stated above, a device was expected to raise its "done" I/O flag when it requested an interrupt, and the convention was that the device would clear its interrupt request when the CPU executed a I/O clear instruction on the device's channel number.

Digital and software-based effects Description Zoom 505 II multi-effect A multi-effects device (also called a "multi-FX" device) is a single electronics effects pedal or rack-mount device that contains many electronic effects.

Even though many control characters are rarely used, the concept of sending device-control information intermixed with printable characters is so useful that device makers found a way to send hundreds of device instructions.

If pairing with a less capable device the user must be aware of the input limitations on the other device, there is no mechanism available for a capable device to determine how it should limit the available input a user may use.

In the case of network equipment, it may be necessary to unplug 50 or more cables from the device, remove the device from the rack, and then disassemble the device chassis to replace the fans.

Many Bluetooth chip manufacturers let link keys be stored on the device—however, if the device is removable, this means that the link key moves with the device.

The following solutions are commonly used and valid for most storage devices: * Device mirroring (replication) – A common solution to the problem is constantly maintaining an identical copy of device content on another device (typically of a same type).

Then each PE device responds to local ARP requests using the IP address of the remote CE device and the hardware address of the local PE device.

Thus the device channel inversion occurs along the channel edges and the device creates off-state leakage path, causing device to turn on.

Typically, the logical device driver (LDD) is written by the operating system vendor, while the physical device driver (PDD) is implemented by the device vendor.

When one of quantity is known, which is made or set with one device, another measurement is made as similar way as possible with the first device using a second device.