Flanges in a sentence

Further, many of the flanges in each standard are divided into "pressure classes", allowing flanges to be capable of taking different pressure ratings.

High vacuum systems generally require metal chambers with metal gasket seals such as Klein flanges or ISO flanges, rather than the rubber gaskets more common in low vacuum chamber seals.

They locally manufactured stud bolts, nuts and flanges as well as sand screens are being used for well operations.

Imports of stainless steel flanges from India were valued at $44 million in 2017, according to the DOC.

A flange joint is a connection of pipes, where the connecting pieces have flanges by which the parts are bolted together.

Applications of compact flanges The initial cost of the theoretical higher performance compact flange is inevitably higher than a regular flange due to the closer tolerances and significantly more sophisticated design and installation requirements.

A steel column is extended by welding or bolting splice plates on the flanges and webs or walls of the columns to provide a few inches or feet of load transfer from the upper to the lower column section.

Each determines the design of the pressure cooker: * The twist-on design has slots on the lid engaging with flanges on the body, similar to a lid on a glass jar, that works by placing the lid on the pot and twisting it about 30° to lock it in place.

Indian shishpar (flanged mace), all steel construction, with eight knife edged, hinged flanges, 18th-19th century, 26 inches long.

In the case of a drum-style pulley, without a groove or flanges, the pulley often is slightly convex to keep the flat belt centred.

It consisted of two recorders in f' connected together by leather flanges: one instrument was voiced to play softly, the other loudly.

Like the Boston pianos, Essex pianos incorporate some of the features of Steinway pianos as well: a wider tail design, an all-wood action with Steinway geometry with rosette-shaped hammer flanges, and reinforced hammers with metal fasteners.

One coupling is placed on each shaft so the two flanges line up face to face.

Pipes with flanges can be assembled and disassembled easily.

Screw-propelled vehicles are propelled by auger-like cylinders fitted with helical flanges.

Ski boots use flanges at the toe or heel to connect to the binding of the ski.

Surrey and York flanges fit to the top of the hot water tank allowing all the water to be taken without disturbance to the tank.

The flanges will be provided with holes for thru-bolts or may have studs welded to the rear surface to secure the unit in the hole in the panel.

The front sides of the unit are provided with flanges to mount to the rack, providing appropriately spaced holes or slots for the rack mounting screws.

The permeability of the metallic chamber walls may have to be considered, and the grain direction of the metallic flanges should be parallel to the flange face.