Baseband in a sentence

Some line codes are digital baseband modulation or digital baseband transmission methods, and these are baseband line codes that are used when the line can carry DC components.

Baseband processor A baseband processor also known as BP or BBP is used to process the down-converted digital signal to retrieve essential data for the wireless digital system.

This baseband, however, does not represent a group-level baseband.

Various uses Baseband bandwidth A baseband bandwidth is equal to the highest frequency of a signal or system, or an upper bound on such frequencies, citation for example the upper cut-off frequency of a Lowpass filter.

What are the significant segments operating in the global Baseband ICs market?

Malware injected into the baseband of a phone is harder to detect.

The standard specifies that the master and slave roles can be switched any time after baseband paging is completed,” according to the researchers.

Intel is likely to gain more sales of wireless baseband chips for the iPhone in the years ahead, he said.

Amplitude modulation produces an output signal that has twice the bandwidth of the original baseband signal.

Capacitance is the enemy of square-wave data transmission (in particular, it slows down edge transitions), and this is a much more important factor for baseband digital data transmission than power handling or attenuation.

DC bias main The earliest magnetic recording systems simply applied the unadulterated ( baseband ) input signal to a recording head, resulting in recordings with poor low-frequency response and high distortion.

Digital transmission There are two main categories of digital communication transmission methods: baseband and passband.

Frequency division multiplexing (FDM) allows an analog telephone wire to carry a baseband telephone call, concurrently as one or several carrier-modulated telephone calls.

However, the passband RF signal is produced by multiplying the baseband signal with a carrier waveform (i.

If no guard interval was applied, this would result in a base band complex valued signal with a sample rate of 1 MHz, which would require a baseband bandwidth of 0.5 MHz according to Nyquist.

In half transponder mode, the frequency deviation of the composite baseband signal is reduced to 18 MHz to allow another signal in the other half of the 36 MHz transponder.

In many commercial data radio applications, audio baseband modulation is not used.

In turn, 5 groups are multiplexed into a super group having a baseband of 312 kHz to 552 kHz.

It is an experimental tool for the evaluation of the combined effects of channel noise and intersymbol interference on the performance of a baseband pulse-transmission system.

It may also include analog-over-analog pulse modulatated baseband signals such as pulse-width modulation.