Lathe

Bramah patented a lathe that had similarities to the slide rest lathe.

His most prized possession is his lathe machine, which he uses to cut and bend the metals to create spectacular pieces.

By March of 1888, Harris had acquired a wood lathe, gig-saw and circular saw, all pedal-powered.

In addition, Carrick will hope to get Latte Lathe back into his starting line-up as soon as possible because the Ivorian – and his potential goals haul – could hold the key to Boro’s prospects this term.

It takes a large lathe to carve such a vessel, measuring at least 4 feet tall.

Perhaps the highlight of the shop was the hand-made, foot-powered lathe he designed and built himself.

According to a police officer at Sulur police station, the incident happened on May 18. Owner of the bike, Suresh Kumar, was running a lathe workshop at Kannampalayam near Sulur, about 20 km from Coimbatore town.

I didn’t know anything about using a lathe to shape woods, I learned it on my own,” said Narin.

It also has automated milling and lathe machines, otherwise known as computer numerical control (CNC).

Students who receive Level 2 certification have proven to have a basic understanding of Lean Manufacturing Concepts, CNC mill and CNC lathe operation, as well as GD&T and programming.

Rivera proceeds to trim the wood so it is flush with the tube and places it into a lathe to cut away the excess wood.

The 1980 PBS film "The Lathe of Haven" is quite surprisingly good.

A lathe is used to spin the bell head and to form a bead at the edge of bell head.

American buildings of the Georgian period were very often constructed of wood with clapboards; even columns were made of timber, framed up, and turned on an oversized lathe.

Before its invention screws could not be cut to any precision using various earlier lathe designs, some of which copied from a template.

Cuts are slicks modified with a lathe to optimize handling.

Early developments in linear turntables were from Rek-O-Kut (portable lathe/phonograph) and Ortho-Sonic in the 1950s, and Acoustical in the early 1960s.

Henry Maudslay developed the first industrially practical screw-cutting lathe in 1800.

If one does not have access to a lathe, an improvised funnel can be made from steel tube and car body filler; as the filler is only subject to compressive forces it is able to do a good job.

In theory, it seems nearly ideal; a stylus replicating the motion of the recording lathe used to cut the "master" record could result in minimal wear and maximum sound reproduction.